How to extend ethernet cable to another room is a frequently asked question recently. The Internet is one of the most essential things in our homes today. However, sometimes it becomes hard to spread it right throughout the house. Typically, it can be tough to find a good way to do it without breaking the bank. But don’t worry, we’re here to help.
If you have a home with multiple rooms, you know the importance of having enough Ethernet cable to cover all of them. Unfortunately, not everyone has the same Ethernet cable layout. Sometimes one room has more Ethernet than another room, and it can be hard to get all of your devices connected.
That’s where this guide comes in. We’ll show you how to extend the Ethernet cable to another room without having to go through a bunch of trouble. With a little bit of effort and some knowledge, you can easily get this done.
What You Need To Know Before Starting
You need to take a few steps to extend the ethernet cable to another room in your house. The first step is to determine the location of the new ethernet cable connection. Next, you’ll need an Ethernet cable.
For instance, you can opt for Jadaol Cat 6 Ethernet cable, which is ideal for this purpose. Ensure to check Jadaol Cat 6 cable review from our other article to learn more about it. There are, however other choices to choose from, including; RJ45, cat 6e ethernet Cable, Mediabridge Ethernet Cable, among others. Point to note; you should choose a cable compatible with your internet service provider and your network.
Next, you’ll need some tools. This includes a switch, connector, and wire strippers. Be sure to have all of these tools on hand to extend the Ethernet cable properly.
Common Ways to Extend Ethernet Cable to Another Room
There are a few ways to extend your Ethernet cable to another room. You can use an Ethernet splitter, an Ethernet switch, or a powerline adapter.
Use Of Ethernet Splitter
An Ethernet splitter is the cheapest and easiest way to extend your Ethernet cable. It is a small box that splits the signal from the Ethernet cable into two separate cables. One cable goes to the computer, and the other goes to the printer, modem, or other devices.
Therefore, this makes it easy for you to extend your ethernet cable to a different room without having to slash it up or build a new connection. There is a set of connectors on the Ethernet splitter, and you use these to connect your devices to the cables.
Use Of An Ethernet Switch
An Ethernet switch is a device that enables you to connect more than two networked devices on the same network without having to use an Ethernet hub or Internet router. It basically connects multiple Ethernet ports to share the bandwidth on a single cable.
The switch also requires power just like your computer needs from its power outlet. If you need more ports than the number that comes packaged on a standard Ethernet switch, you can buy an Ethernet hub. A switch has to run at 4 to 12 volts DC from its outlet in your house’s electrical system and cannot plug into a modem because it needs its electrical supply.
Therefore, an Ethernet switch comes in handy when extending Ethernet to a different room. With it, you can easily link more than two devices using network connections on this same network ethernet cable.
Using Powerline Adapter
Powerline adapters are another way to extend an Ethernet cable to a different room. They use the electrical wiring in your house to connect your devices. They send data over the electrical wiring at speeds similar to what you get with a standard Ethernet cable.
Some powerline adapters such as TP-LINK Powerline are very reliable and work well, but others may be unreliable and may disconnect from the network frequently. They also have a limited range.
Powerline adapters are available in two forms: a pair of plug-in adapters that you plug into wall outlets and a standalone adapter that you connect to an existing network router. The plug-in type is easier to use most of the time because they don’t require any extra software or configuration.
You can use powerline adapters to connect computers and printers in different rooms or floors of your home, but you cannot use them to link devices on separate networks together.
The good news is that some powerline network adapters come with Ethernet ports, so they can be used as standard Ethernet switches if needed. Some even come with Wi-Fi capability, so they can be used as wireless access points if needed. It is a good option if you don’t have an Ethernet port in the room where you want to extend the cable.
How To Connect Your Devices To The New Ethernet Cable
1. Connect your devices to the new ethernet cable
2. Put your Ethernet switch in the same room as your devices
3. Connect the Ethernet cables from your devices to the switch
4. Turn on your devices and wait for them to connects
What Are The Benefits of Extending Ethernet Cable?
There are a few benefits to extending ethernet cable. The first and most important benefit is; it can help you connect two rooms in your house or apartment. This will make it easier for everyone to use your internet in those other rooms and save you time and money.
Additionally, extending ethernet cables can help improve the quality of your internet connection. When you experience slow or an unreliable internet connection, it can be not easy to do anything online. By extending your ethernet cable, you can improve your connection and ensure that all of your devices are connected to the internet securely.
Conclusion
The extension of ethernet cable is a necessary evil for any business. By following the methods mentioned above, you can extend your Ethernet cable to another room in your house or office without having to incur so much on the project. And with the right extension cable, you can get the most out of your current Ethernet connection.
You can successfully now connect different devices from various rooms with ease and convenience.